FEATURED PROJECT: Communication Towers Anchorage to Fairbanks
Communication Towers Anchorage to Fairbanks
Project Overview
Due to extreme weather conditions between Anchorage and Fairbanks, Alaska, steel shaft communication towers are used in place of traditional timber poles or angle-iron towers. TMF fabricated all components of these towers which were broken down into 15 different sections for shipping purposes.
After the 30” OD shafts were rolled, fit, and welded, the spiral flanges, intended for wind deflection, were rolled and fit-up by hand to best match the required layout. Once ring flanges were welded to the ends of all shaft assemblies, TMF shop-fit each section together to match fit for customer assurance. Each tower weighed roughly 10- 12 Tons and ranged in height from 128’ to 145’.
Project Highlights
- Spiral flanges were rolled and fit-up by hand to match required layout
- All columns were rolled from plate and fabricated by TMF
- Fabrication work finished one-month ahead of schedule
- Use of Low-Temperature Steel (CVN = 15 ft/lbs @ -20o F)
