FEATURED PROJECT: Williams Creek Bridge Replacement

Williams Creek Bridge Replacement

In order to continue to serve as a critical transportation link, the Federal Highway Administration determined that the previous Shoup Bridge (a 60-year old, single-lane concrete & steel structure) would be replaced with a two-lane, single-span network-arch structure made entirely from weathering steel.

Fabricated by Thompson Metal Fab, the two-lane arch bridge is 224’ long, about 40’ wide, approximately 40’ tall, and weighs nearly 344,500 lbs. The bridge is being fabricated to AISC & AWS D1.5 standards and features fracture critical members.

Highlights

-Our large facility’s extensive bridge cranes allowed us to handle the nearly 100’ long curved members and test fit them on custom fixtures prior to shipping.

-The zinc, epoxy, and urethane coatings were applied in house via TMF’s dedicated paint bay.

-2020 AISC/NSBA Prize Winner

Bay Bridge: East Tie In

Thompson Metal Fab, Inc. was selected by Caltrans (owner) for the fabrication of approximately 3,100-Tons of temporary detour steel for the Bay
Learn More
Williams Creek Bridge Replacement

Williams Creek Bridge Replacement In order to continue to serve as a critical transportation link, the Federal Highway Administration determined that the
Learn More
Puyallup SR 167 Bridge Replacement

The SR-167 Puyallup River Bridge consisted of fabricating and shop priming (25) built-up plate girders for the 550’ long bridge. All cross-framing,
Learn More
Universal City Pedestrian Bridge

Awarded the 2016 Outstanding Bridge Project of the Year by the American Society of Civil Engineers (Los Angeles), the Universal City Pedestrian
Learn More
Sellwood Bridge

The 1,971-ft ‘old bridge,’ originally constructed in 1925, was a marvel of engineering for its time; largely because of its 1,100-ft long
Learn More
Mill Creek Bridge

Material requirements for this four-girder bridge project puts it among the most unique completed at Thompson Metal Fab. While the cross-frames were
Learn More
Montague Expressway Pedestrian Overcrossing

Montague Expressway Pedestrian Overcrossing Thompson Metal Fab in Vancouver WA fabricated the Montague Expressway Pedestrian Overcrossing for the Santa Clara Valley Transportation
Learn More
Sea-Tac IAF Pedestrian Bridge

Sea-Tac IAF Pedestrian Bridge Overview: As part of Sea-Tac’s International Arrivals Facility expansion, Thompson Metal Fab was the primary fabricator of the
Learn More
Grand Avenue Pedestrian Bridge

Grand Avenue Pedestrian Bridge The Grand Avenue Pedestrian Bridge is a triple-level steel bridge spanning a highway and a railway line in
Learn More
Congressman Earl Blumenauer Bicycle & Pedestrian Bridge

Congressman Earl Blumenauer Bicycle & Pedestrian Bridge The Earl Blumenauer Bicycle and Pedestrian Bridge (originally named Sullivan’s Crossing) spans over I-84 near
Learn More
Alameda Corridor Railroad Bridge

Alameda Corridor Railroad Bridge PROJECT OVERVEW Thompson Metal Fab fabricated two steel railroad structures for the Alameda Corridor Light Rail Expansion Project:
Learn More
The Dalles US197

PROJECT OVERVIEW US Route 197 crosses the Columbia River at the Oregon and Washington border at The Dalles, Oregon. The Dalles Bridge
Learn More
Panther Creek Bridge

Thompson Metal Fab shop fabricated the Panther Creek Bridge to replace the original bridge which was built in 1956. The Panther Creek
Learn More
WSDOT NE St. John’s Boulevard / SR500

NE St. John’s Boulevard / SR500 Two new bridges (part of an off-ramp/on-ramp system) were required as part of a WSDOT project
Learn More
Gilman Street Pedestrian Bridge

PROJECT OVERVIEW: Thompson Metal Fab fabricated the arch for California’s Gilman Street Pedestrian Bridge, a total span of over 200 feet. The
Learn More