From structural steel to complex industrial builds, our facility is equipped to handle projects at any scale. Browse our full equipment list below, or contact us to discuss your project’s specific requirements.
Beamline
Max Width
3'-7"
Min Width
3"
Max Height
1’-8"
Max Height
3/4"
Max Length
70’
Min Length
6’
Max Drill Size
1-1/2"
Min Drill Size
3/8"
Beam Cut
Max Width
40"
Min Material Length
48"
Max Cut Thickness
1’-3/4"
Max Height
16"
Max Infeed Length
60’
Min Outfeed Length
60’
Flame Table
Torches
5
Max Width
11’-10"
Table Length
98’-10"
Min Torch Spacing
6’-1/8"
Plate Thickness
0-8”
Plasma table
Plasma
1
Flame Torch
1
Min Drill Size
3/8"
Max Drill Size
2’-1/4"
Plate Thickness
0-8"
Plate Thickness
120” x 720"
BAND Saw
Max Width
25”
Max Height
30”
Max Miter
60°
Drill Table
Max Material Width
8’
Min Material Width
2’-1/2”
Min Material Length
3’
Max Thickness (Torch)
3”
Max Thickness (Plasma)
1’-1/4"
Min Thickness
1/4"
Max Drill Size
1’-1/2"
Min Drill Size
3/8"
Press brake
Capacity
1,000 tons
Bed Length
30’
Plate Thickness
Part-dependent
Note: Plate thickness depends on part length, width, and bend radius. Contact TMF for project-specific capacity.
Press brake
Capacity
400 tons
Bed Length
16’
Plate Thickness
Part-dependent
Note: Plate thickness depends on part length, width, and bend radius. Contact TMF for project-specific capacity.
Press brake
Capacity
100 tons
Bed Length
12’
Plate Thickness
Part-dependent
Plate roll
Bed Length
8’
Top Roll Diameter
9”
Plate Thickness
Part-dependent
Plate roll
Bed Length
12’
Top Roll Diameter
24”
Plate Thickness
Part-dependent
QTY. 13
Scissor Lifts
19’ reach
QTY. 2
Scissor Lifts
16’ reach
QTY. 1
Boom Lifts
86’ reach
QTY. 1
Boom Lifts
60’ reach
QTY. 1
Boom Lifts
45’ reach
QTY. 3
Z-LiftsZ-Lifts
35’ reach
QTY. 2
Standard Forklift
36K LBS.
QTY. 1
Standard Forklift
25K LBS.
QTY. 2
Side Loaders
17.3K LBS.
QTY. 10
Standard Forklift
8-10K LBS.
QTY. 1
Standard Forklift
6.5K LBS.
Inside
34’L x 34’w x 38’h
Overall
34’L x 48’w x 41’h
Capacity
80t (2 blocks at 40t ea)
Max Hook Height
25’
BAY
Bridge Cranes
JIB CRANES (1-TON)
Bay 4 (BLDG 40)
20T • 30T • 8/16T (30T block, 5T block)
5
Bay 5 (BLDG 40)
10T • 15T • 25T • 25T
19
Bay 6 (BLDG 40)
5T • 7T • 10T • 10T
14
Bay 7 (BLDG 40)
15T • 15T
17
Bay 8 (BLDG 40)
10T • 10T • 10T
12
Bay 9 (BLDG 40)
10T • 10T • 15T
Bay 10 (BLDG 40)
10T • 15T • 35T • 35T
12
Bay 11 (BLDG 40)
30T (2×15T) • 30T (2×15T) • 30T/5T (30T block, 5T block)
12
Bay 3 (BLDG 41)
5T • 5T • 5T • 5T
8
Bay 8 (BLDG 41)
10T • 10T • 25T • 5T
TOTAL
34 BRIDGE CRANES
99 JIB CRANES
SandBLAST & Painting
LOCATION/ROOM
DESCRIPTION
Bay 8 (BLAST BAY)
Dedicated sandblasting facility (27'W x 17'H x 82'L) featuring a sand recovery system, 20-ton overhead hopper, and 14,000 cfm dust collection.
Bay 9 (PAINT SPRAY AREA)
34,000 sq ft total — includes 12,000 sq ft temperature-controlled spray area. Equipped with two 10T & one 15T overhead cranes
Storage
Four 100-gallon flammable liquid storage cabinets
Paint Storage
20′ × 12′ environmentally controlled area with fire suppression system
Solvent
60-gallon PRI solvent distillation unit
Ground Support
One Kubota Skidsteer — Model SSV65
SandBLAST & Painting
QTY. 1
28-Ton “Key” Blast Pot28-Ton “Key” Blast Pot
with remote control blast unit
QTY. 1
600 lb. Sandblast Pots
with hose and nozzles
QTY. 5
Airless Pumps
with hoses and guns, size 21-1 through 70-1
QTY. 8
Conventional Spray Pots
2-gal. through 20-gal.
QTY. 2
Conventional Spray Pots
2-quart
QTY. 2
Pressure Washers
QTY. 1
Mobile Pressure Wash-Down Facility
QTY. 1
1250 cfm Quincy compressor
QTY. 1
1500 cfm ZEKS Dehumidifier (inline)
QTY. 2
Graco XP-70hf Plural Component Spray System
QTY. 9
450,000 BTU Natural Gas Portable Heaters
QTY. 1
1,000,000 BTU Heat Wagon
QTY. 2
50 KW Electric Heaters
QTY. 2
55 Gallon Wet/ Dry Barrel Vacuums
QTY. 4
Explosion Proof Fans
QTY. 1
6-Ton Shmidt Portable Blast Pot
QTY. 1
2400 cfm Portable Bag House
QTY. 11
CWIs on staff between two shifts
Note: 2 with AWS D1.5 Bridge Endorsement
QTY. 4
Level II Technicians
QTY. 8
Mag Yokes
QTY. 4
Level II Technicians
QTY. 2
Level II Technicians
QTY. 3
UT Scopes
QTY. 1
Olympus XRF PMI
QTY. 1
Leeb Hardness Tester
AMPP CLIP Level 1 & 2
QTY. 15+
Defelsko Gauges (Ferrous, Non-Ferrous, Duplex)
Blast & Coating Inspections
Soluble Saltester
Adhesion Testers
Surface Profile Gauge
Low Voltage Holiday Tester
Dew Point Meters
